Journal Publications

2021 (12 Papers)
123. Abbas, H., Siddiqui, N. A., Khateeb, B. M., Almusallam, T. H., Al-Salloum, Y. A. (2021). Performance of new CFST square column-to-foundation connections for cyclic loads. Journal of Constructional Steel Research 185, 106868. Click Here
122. Alrshoudi, F., Abbas, H., Abadel, A., Altheeb, A., Albidah, A., Al-Salloum, Y. (2021). Compression Behavior and Modeling of FRP-Confined High Strength Geopolymer Concrete. Construction and Building Materials, 283, 122759. Click Here
121. Abadel, A.A., Albidah, A.S., Altheeb, A.H., Alrshoudi, F.A., Abbas, H., Al-Salloum, Y.A. (2021). Effect of molar ratios on strength, microstructure & embodied energy of metakaolin geopolymer. Advances in Concrete Construction, 11(2), 127-140. Click Here
120. Abbas, H., Siddiqui, N. A., Almusallam, T. H., Abadel, A. A., Elsanadedy, H., & Al-Salloum, Y. A. (2021). Effect of rebar spacing on the behavior of concrete slabs under projectile impact. Structural Engineering and Mechanics, 77(3), 329-342. Click Here
119. Elsanadedy, H., Alrubaidi, M., Abbas, H., Almusallam, T., & Al-Salloum, Y. (2021). Progressive collapse risk of 2D and 3D steel-frame assemblies having shear connections. Journal of Constructional Steel Research, 179, 106533. Click Here
118. Almajed, A., Abbas, H., Almusallam, T., & Al-Salloum, Y. (2021). Stabilization of sand using energy efficient materials under normal and extreme hot weathers. Journal of Cleaner Production, 124914. Click Here
117. Elsanadedy, H. M., Abbas, H., Almusallam, T. H., & Al-Salloum, Y. A. (2021). Hybrid UHPC/NSM CFRP strips vs. traditional systems for flexural upgrading of RC beams–Experimental and FE study. Composite Structures, 113291. Click Here
116. Albidah, A., Alghannam, M., Abbas, H., Almusallam, T., & Al-Salloum, Y. (2021). Characteristics of Metakaolin-Based Geopolymer Concrete for Different Mix Design Parameters. Journal of Materials Research and Technology. Click Here
115. Elsanadedy, H. M., Al-Salloum, Y. A., Alrubaidi, M. A., Almusallam, T. H., Siddiqui, N. A., & Abbas, H. (2021). Upgrading of precast RC beam-column joints using innovative FRP/steel hybrid technique for progressive collapse prevention. Construction and Building Materials, 121130. Click Here
114. Elsanadedy, H. M., Al-Salloum, Y. A., Alrubaidi, M. A., Almusallam, T. H., & Abbas, H. (2021). Finite element analysis for progressive collapse potential of precast concrete beam-to-column connections strengthened with steel plates. Journal of Building Engineering, 101875. Click Here
113. Khan, M. S., Almutairi, S., & Abbas, H. (2021). Mechanical properties of concrete subjected to cyclic thermal loading. European Journal of Environmental and Civil Engineering, 1-14. Click Here
112. L. Alaoud, Y. Al-Salloum, H. Abbas (2021). Experimental Investigation for GFRP rebar Couplers for Reinforced Concrete. Journal of King Saud University-Engineering Sciences, 33(2), 104-110. Click Here

2020 (10 Papers)
111. Abadel, A., Abbas, H., Alrshoudi, F., Altheeb, A., Albidah, A., & Almusallam, T. (2020, December). Experimental and analytical investigation of fiber alignment on fracture properties of concrete. In Structures (Vol. 28, pp. 2572-2581). Elsevier. Click Here
110. Alghannam, M., Albidah, A., Abbas, H., & Al-Salloum, Y. (2020). Influence of Critical Parameters of Mix Proportions on Properties of MK-Based Geopolymer Concrete. Arabian Journal for Science and Engineering, 1-10. Click Here
109. Albidah, A., Abadel, A., Alrshoudi, F., Altheeb, A., Abbas, H., Al-Salloum, Y. (2020). Bond strength between concrete substrate and metakaolin geopolymer repair mortars at ambient and elevated temperatures. Journal of materials Research and Technology, 9(5), 10732-10745. Click Here
108. Albidah, A., Altheeb, A., Alrshoudi, F., Abadel, A., Abbas, H., Al-Salloum, Y. (2020). Bond performance of GFRP and steel rebars embedded in metakaolin based geopolymer concrete. Structures, 27, 1582-1593). Elsevier. Click Here
107. Almajed, A., Abbas, H., Arab, M., Alsabhan, A., Hamid, W., & Al-Salloum, Y. (2020). Enzyme-Induced Carbonate Precipitation (EICP)-Based Methods for Ecofriendly Stabilization of Different Types of Natural Sands. Journal of Cleaner Production, 122627. Click Here
106. Khateeb, B. M., Siddiqui, N. A., Almusallam, T. H., Abbas, H., & Al-Salloum, Y. A. (2020). Behavior of novel CFST circular column-to-foundation connections under cyclic loading. Engineering Structures, 221, 111051. Click Here
105. M. Alrubaidi, H. Elsanadedy, H. Abbas, T Almusallam, Y Al-Salloum (2020). Investigation of different steel intermediate moment frame connections under column-loss scenario. Thin-Walled Structures, 101512 Click Here
104. N. Siddiqui, H. Abbas, T. Almusallam, A. Binyahya, Y. Al-Salloum (2020). Compression behavior of FRP-strengthened RC square columns of varying slenderness ratios under eccentric loading. Journal of Building Engineering, 101512 Click Here
103. S. Pal, M. Shariq, H. Abbas, A.K. Pandit, A. Masood (2020). Strength characteristics and microstructure of hooked-end steel fiber reinforced concrete containing fly ash, bottom ash and their combination. Construction and Building Materials, 247, 118530 Click Here
102. Tarek Almusallam, Yousef Al-Salloum, Hussein Elsanadedy, Tuan Ngo, Priyan Mendis, Husain Abbas (2020). Development limitations of compressive arch and catenary actions in RC SMRFs under sudden column-loss scenarios. Structures and Infrastructures Engineering, 1-19 Click Here

2019 (6 Papers)
101. Elsanadedy, H. M., Al-Salloum, Y. A., Almusallam, T. H., Ngo, T., Abbas, H. (2019). Assessment of progressive collapse potential of special moment resisting RC frames–Experimental and FE study. Engineering Failure Analysis, 105, 896-918. Click Here
100. Elsanadedy, H. M., Abbas, H., Almusallam, T. H., & Al-Salloum, Y. A. (2019). Organic versus inorganic matrix composites for bond-critical strengthening applications of RC structures–State-of-the-art review. Composites Part B: Engineering, 106947. Click Here
99. Abdulrahman Albidah, Aref Abadel, Husain Abbas, Tarek Almusallam, Yousef Al-Salloum, Experimental and Analytical Study of Strengthening Schemes for Shear Deficient RC Deep Beams, Construction and Building Materials, 216, 673-686. Click Here
98. M Shariq, Husain Abbas, J Prasad (2019) “Effect of magnitude of sustained loading on the long-term deflection of RC beams”, Archives of Civil and Mechanical Engineering, 19(3), 779–791. Click Here
97. Husain Abbas, Yousef Al-Salloum, Hussein Elsanadedy, Tarek Almusallam (2019) “ANN models for prediction of residual strength of HSC after exposure to elevated temperature”, Fire Safety Journal, 106, 13–28. Click Here
96. Hussein Elsanadedy, Yousef Al-Salloum, Tarek Almusallam, Abdulhafiz Alshenawy, Husain Abbas, (2019), “Experimental and FE study on FRP-upgraded RC beams with large rectangular web openings in shear zone”, Construction and Building Materials, 194, 322–343. Click Here

2018 (2 Papers)
95. Nadeem Siddiqui , Yousef Al-Salloum, Tarek Almusallam, Aref Abadel, Husain Abbas, (2018), “Reliability assessment of of HFRC Slabs against Projectile Impact”, International Journal of Concrete Structures and Materials, 12:58 . Click Here
94. Y Al-Salloum, G Al-Amri, N Siddiqui, T Almusallam, H. Abbas (2018), “Effectiveness of CFRP-Strengthening in Improving Cyclic Compression Response of Slender RC Columns”, J of Composites for Construction, 22(3): 04018009. Click Here

2017 (8 Papers)
93. Y. Al-Salloum, S. Hadi, H. Abbas, T. Almusallam, M.A. Moslem (2017), “Bio-induction and bioremediation of cementitious composites using microbial mineral precipitation – A review”, Construction and Building Materials, 154, 857–876. Click Here
92. Y.A. Al-Salloum, H. Abbas, T.H. Almusallam, T. Ngo, P. Mendis (2017), “Progressive Collapse Analysis of a Typical RC High-Rise Tower”, Journal of King Saud University – Engineering Sciences, Published Online. Click Here
91. H. Elsanadedy, T. Almusallam, Y. Al-Salloum, H. Abbas (2017), “Investigation of precast RC beam-column assemblies under column-loss scenario”, Construction and Building Materials, 142, 552–571. Click Here
90. T. Almusallam, Y. Al-Salloum, T. Ngo, P. Mendis, H. Abbas (2017), “Experimental investigation of progressive collapse potential of ordinary and special moment-resisting reinforced concrete frames”, Materials and Structures, 50:137. Click Here
89. Yousef Al-Salloum, H. Abbas, Q.I. Sheikh, S. Hadi, Saleh Alsayed, Tarek Almusallam (2017), “Effect of some biotic factors on microbially-induced calcite precipitation in cement mortar”, Saudi Journal of Biological Sciences, 24(2), 286–294. Click Here
88. M. Shariq, H. Abbas , J. Prasad (2017), “Effect of GGBFS on time-dependent deflection of RC beams”, Computers and Concrete, 19(1), 51-58, DOI: 10.12989/cac.2017.19.1.051. Click Here
87. Husain Abbas , Yousef Al-Salloum, Saleh Alsayed, Mohammed Alhaddad and Rizwan A. Iqbal (2017), “Post-Heating Response of Concrete-Filled Circular Steel Columns”, KSCE J of Civil Engineering, 21(4), 1-12, DOI: 10.1007/s12205-016-0852-3. Click Here
86. M. S. Morsy, Y.A. Al-Salloum, T.H. Almusallam and H. Abbas (2017), “Mechanical behavior of activated kaolin binder using slaked lime and anhydrous gypsum as activators”, KSCE J of Civil Engineering, 21(3), 863–871, DOI: 10.1007/s12205-016-0667-2. Click Here

2016 (10 Papers)
85. Tarek Almusallam, S.M. Ibrahim, Yousef Al-Salloum, Aref Abadel and Husain Abbas (2016), “Analytical and experimental investigations on the fracture behavior of hybrid fiber reinforced concrete”, Cement & Concrete Composites, 74, 201-217. Click Here
84. S.M. Ibrahim, Tarek Almusallam, Yousef Al-Salloum, Aref Abadel and H. Abbas (2016), “Strain rate dependent modeling for compression response of hybrid fiber reinforced concrete”, Latin American Journal of Solids and Structures, Vol. 13, pp. 1695-1715. Click Here
83. H. M. Elsanadedy, Yousef A. Al-Salloum, Zaki M. Al-Zaheri, Saleh H. Alsayed, H. Abbas (2016), “Behavior and Design Aspects of FRP-Strengthened URM Walls under Out-of-Plane Loading”, J of Composites for Construction, ASCE, 04016048. Click Here
82. Aref Abadel, Husain Abbas, Yousef Al-Salloum, et al. (2016), “Discussion: Mechanical properties of hybrid fibre-reinforced concrete – analytical modelling and experimental behavior”, Magazine of Concrete Research, Paper 1600243. Click Here
81. Saleh H. Alsayed, H.M. Elsanadedy, Zaki M. Al-Zaheri, Yousef A. Al-Salloum, H. Abbas (2016), “Blast response of GFRP-strengthened infill masonry walls”, Construction and Building Materials, Volume 115, Pages 438–451. Click Here
80. M. Shariq, J. Prasad, H. Abbas (2016), “Creep and drying shrinkage of concrete containing GGBFS”, Cement and Concrete Composites, Volume 68, Pages 35–45. Click Here
79. H.M. Elsanadedy, H. Abbas, Y.A. Al-Salloum and T.H. Almusallam (2016), “Shear strength prediction of HSC slender beams without web reinforcement”, Materials and Structures, Vol. 49, Issue 9, pp. 3749-3772. Click Here
78. Aref Abadel, Husain Abbas, Tarek Almusallam, Yousef Al-Salloum, Nadeem Siddiqui (2016), “Mechanical properties of hybrid fibre-reinforced concrete–analytical modelling and experimental behaviour”, Magazine of Concrete Research, Vol. 68, Issue 16, pp. 823–843. Click Here
77. Z.I. Baig, S.H. Alsayed and H. Abbas (2016), “Punching of slab–column connections strengthened using external steel shear bolts”, Magazine of Concrete Research, Vol. 68(2), pp. 55-68. Click Here
76. M.S. Khan and H. Abbas (2016), “Performance of concrete subjected to elevated temperature”, European Journal of Environmental and Civil Engineering, published online. Click Here

2015 (8 Papers)
75. Al-Salloum Y.A., Almusallam T.H., M.Y. Khawaji, Ngo T., Elsanadedy H.M., and H. Abbas (2015), “Progressive collapse analysis of RC Buildings against Internal Blast”, Advances in Structural Engineering,Vol. 18, No. 12, pp. 2181-2192. Click Here
74. H. Abbas, Aref A. Abadel, Tarek H. Almusallam and Yousef A. Al-Salloum (2015), “Effect of CFRP and TRM strengthening of RC slabs on punching shear strength”, Latin American Journal of Solids and Structures, Vol. 12, pp. 1616-1640. Click Here
73. Mohammad S Alhaddad, Khalid M Wazira, Yousef A Al-Salloum and H. Abbas (2015), “Ductility damage indices based on seismic performance of RC frames”, Soil Dynamics and Earthquake Engineering, Vol. 77, pp. 226-237. Click Here
72. H.M. Elsanadedy, H. Abbas, Y.A. Al-Salloum and T.H. Almusallam (2015), Closure to “Prediction of intermediate crack debonding strain of externally bonded FRP laminates in RC beams and one-way slabs”, Journal of Composites for Construction, ASCE, 19(2), 07014004. Click Here
71. Tarek H. Almusallam, Aref A. Abadel, Yousef A. Al-Salloum, Nadeem A. Siddiqui and H. Abbas, (2015), “Effectiveness of hybrid-fibers in improving the impact resistance of RC slabs”, International Journal of Impact Engineering, Vol. 81, pp. 61-73. Click Here
70. MS Khan and H. Abbas, (2015), “Effect of elevated temperature on the behavior of high volume fly ash concrete”, KSCE Journal of Civil Engineering, Vol. 19(6), pp. 1825-1831. Click Here
69. Yousef T.H. Almusallam, Y.A. Al-Salloum, S.H. Alsayed, Rizwan A. Iqbal and H. Abbas, (2015), “Effect of CFRP strengthening on the response of RC slabs to hard projectile impact”, Nuclear Engineering and Design, Volume 286, pp. 211–226. Click Here
68. Yousef Al-Salloum, Tarek Almusallam, S.M. Ibrahim and H. Abbas, (2015), “Rate dependent behavior and modeling of concrete based on SHPB experiments”, Cement & concrete composites, Vol. 55, pp. 34-44. Click Here

2014 (11 Papers)
67. Yousef Al-Salloum, Saleh Alsayed, Tarek Almusallam, S.M. Ibrahim and H. Abbas, (2014), “Investigations on the influence of radial confinement in the impact response of concrete”, Computers and Concrete, Vol. 14, No. 6, pp. 675-694. Click Here
66. N.A. Siddiqui, S.H. Alsayed, Y.A. Al-Salloum, R.A. Iqbal and H. Abbas, (2014), “Experimental investigation of slender circular RC columns strengthened with FRP composites”, Construction & Building Materials, Vol. 69, pp. 323-334. Click Here
65. H.M. Elsanadedy, T.H. Almusallam, Y.R. Alharbi, Y.A. Al-Salloum and H. Abbas, (2014), “Progressive collapse potential of a typical steel building due to blast attacks”, Journal of constructional steel research, Vol. 101, pp. 143-157. Click Here
64. S.H. Alsayed, T.H. Almusallam, S.M. Ibrahim, N.M. Al-Hazmi, Y.A. Al-Salloum and H. Abbas, (2014), “Experimental and numerical investigation for compression response of CFRP strengthened shape modified wall-like RC Column”, Construction & Building Materials, Vol. 63, pp. 72-80. Click Here
63. S.M. Ibrahim, Y.A. Al-Salloum and H. Abbas, (2014), “Dynamic analysis of tapered plates based on higher order beam theory”, Advanced Materials Research, Vols. 919-921 (2014), pp. 79-82. Click Here
62. H. Abbas, T.H. Almusallam and Y.A. Al-Salloum (2014), “Improving the Impact Resistance of Reinforced Concrete”, Advanced Materials Research, Vols. 919-921 (2014), pp. 1924-1929. Click Here
61. Nadeem A. Siddiqui, Baha M.A. Khateeb, T.H. Almusallam, Y.A. Al-Salloum, R.A. Iqbal and H. Abbas, (2014), “Reliability of RC shielded steel plates against the Impact of sharp nose projectiles”, Int Journal of Impact Engineering, Vol. 69, pp. 122-135. Click Here
60. H.M. Elsanadedy, H. Abbas, Y.A. Al-Salloum and T.H. Almusallam (2014), “Prediction of intermediate crack debonding strain of externally bonded FRP laminates in RC beams and one-way slabs”, Journal of Composites for Construction, ASCE, Vol. 18, Issue 5. Click Here
59. Nadeem A. Siddiqui, Baha M.A. Khateeb, T. Almusallam and H. Abbas, (2014), “Reliability of double-wall containment against the impact of hard projectiles”, Nuclear Engineering and Design, Vol. 270, pp. 143-151. Click Here
58. M.S. Morsy, Y. Al-Salloum, T. Almusallam and H. Abbas, (2014), “Effect of nano-metakaolin addition on the hydration characteristics of fly ash blended cement mortar”, Journal of Thermal Analysis and Calorimetry, Online. Click Here
57. S.M. Ibrahim, S.H. Alsayed, H. Abbas, E. Carrera, Y.A. Al-Salloum and T.H. Almusallam (2014), “Free vibration of tapered beams and plates based on unified beam theory”, Journal of Vibration and Control, Online. Click Here

2013 (7 Papers)
56. M. Shariq, J. Prasad, H. Abbas (2013), “Long-term deflection of RC beams containing GGBFS”, Magazine of Concrete Research, Vol. 65, Issue 24, pp. 1441-1462. Click Here
55. F. Mahdi, H. Abbas and A.A. Khan (2013), “Flexural, shear and bond strength of polymer concrete utilizing recycled resin obtained from post consumer PET bottles”, Construction and Building Materials, Vol. 44, pp. 798-811. Click Here
54. M.S. Khan, J. Prasad, H. Abbas (2013), “Bond Strength of RC Beams subjected to Cyclic Thermal Loading”, Construction and Building Materials, Vol. 38, pp. 644–657. Click Here
53. M. Hosseini, H. Abbas (2013), “Strain Hardening in M-P Interaction for Metallic Beam of I-Section”, Thin-Walled Structures, Vol. 62, pp. 243-256. Click Here
52. Mohd Shariq, Jagdish Prasad, H. Abbas (2013), “Effect of GGBFS on age dependent static modulus of elasticity of concrete” Construction and Building Materials, Vol. 41, pp. 411–418. Click Here
51. M.S. Khan, J. Prasad and H. Abbas (2013), “Effect of High Temperature on High Volume Fly Ash Concrete”, Arabian Journal for Science and Engineering, Technical Note, pp. 1-10. Click Here
50. T.H. Almusallam, N.A. Siddiqui, R.A. Iqbal, H. Abbas (2013), “Response of hybrid-fiber reinforced concrete slabs to hard projectile impact”, Int J of Impact Engineering, Vol. 58, pp. 17-30. Click Here

2012 (6 Papers)
49. Y.A. Al-Salloum, H.M. Elsanadedy, H. Abbas and S.H. Alsayed (2012), “Prediction of Strength Parameters of FRP Confined Concrete”, Composites Part B: Engineering, Vol. 43, pp. 228–239. Click Here
48. A.A. Shah, H. Abbas, S.H. Alsayed, Y.A. Al-Salloum, T.H. Almusallam (2012), “Predicting Residual Strength of Non-linear Ultrasonically Evaluated Damaged Concrete using Artificial Neural Network”, Construction and Building Materials, Vol. 29, pp. 42–50. Click Here
47. H. Abbas and N. Jones (2012), “Influence of Strain Hardening on Bending Moment – Axial Force Interaction”, International Journal of Mechanical Sciences, Vol. 55, pp. 65-77. Click Here
46. Y.A. Al-Salloum, Abid A. Shah, H. Abbas, S.H. Alsayed, T.H. Almusallam and M.S. Al-Haddad (2012), “Characterization of Compressive Strength of Concrete using Neural Networks”, Computers and Concrete, Vol. 10 (2), pp. 197-217. Click Here
45. M.S. Morsy, Y.A. Al-Salloum, H. Abbas and S.H. Alsayed (2012), “Behavior of Blended Cement Mortars Containing Nano-Metakaolin at Elevated Temperatures”, Construction and Building Materials, Vol. 35, pp. 900–905. Click Here
44. M. Hosseini, H. Abbas (2012), “Neural Network Approach For Prediction of Deflection of Clamped Beams Struck by a Mass”, Thin-Walled Structures, Vol. 60, pp. 222-228. Click Here

2011 (4 Papers)
43. H. Abbas, S.H. Alsayed, T.H. Amusallam and Y.A. Alsalloum (2011), “Estimation of Hole-Diameter in Thin Metallic Plates Perforated by Spherical Projectiles Using Genetic Algorithms”, Archive of Applied Mechanics, Vol. 81, No. 7, pp. 907-924. Click Here
42. H.M. Elsanadedy, T.H. Almusallam, H. Abbas, Yousef A. Al-Salloum and Saleh H. Alsayed (2011) “Effect of blast loading on CFRP-retrofitted RC columns – A Numerical Study”, Latin American Journal of Solids and Structures, Vol. 8, pp. 55-81. Click Here
41. I.K. Khan and H. Abbas (2011), “Static and Dynamic Response of Cost Effective Unreinforced Brick Masonry Buildings”, Archive of Civil and Mechanical Engineering, Vol. XI, No. 4, pp. 921-941. Click Here
40. H. Abbas, Al-Salloum Y.A., Alsayed S.H., Elsanadedy H.M. and Rizwan I. Iqbal (2011),”Numerical Study for Retrofitting of RC columns for blast loading”, New Building Materials and Construction World, June 2011, Article No. 23886. Click Here

2010 (6 Papers)
39. F. Mahdi, H. Abbas and A.A. Khan (2010), “Strength characteristics of polymer mortar and concrete using different compositions of resins derived from post-consumer PET bottles”, Construction and Building Materials, Vol. 24(1), pp. 25-36. Click Here
38. T.H. Almusallam, H.M. Elsanadedy, H. Abbas, P. Mendis and T. Ngo (2010), “Numerical Analysis for Progressive Collapse Potential of a Typical Framed Concrete Building”, International Journal of Civil and Environmental Engineering, Vol. 10(2), pp. 40-46. Click Here
37. M.S. Khan, J. Prasad and H. Abbas (2010), “Shear Strength of RC Beams subjected to Cyclic Thermal Loading”, Construction and Building Materials, Vol. 24, Issue 10, pp. 1869-1877. Click Here
36. Tarek H. Almusallam, Hussein M. Elsanadedy, H. Abbas, Saleh H. Alsayed and Yousef A. Al-Salloum (2010), “Progressive collapse analysis of a RC building subjected to blast loads”, Structural Engineering & Mechanics, Vol. 36, No. 3, pp. 301-319. Click Here
35. N.A. Siddiqui, Abbas, H. and Makrani, I.A. (2010), “A simplified procedure for reliability assessment of thin circular tubes against axial crushing” Journal of Modeling and Simulation in Design and Manufacturing, India, Vol. 1, No. 2, pp. 58-66.
34. S.H. Alsayed, H. Abbas and Y.A. Al-Salloum (2010), “Numerical Study for CFRP Strengthening of RC Columns for Blast Resistance”, World Journal of Engineering, Vol 7, Supplement 3, pp. 55-56. Click Here

2000 – 2009 (28 Papers)
33. M. Hosseini, H. Abbas and N.K. Gupta (2009), “Change in thickness in straight fold models for axial crushing of thin walled frusta and tubes”, Thin-Walled Structures, Vol. 47, Issue 1, pp. 98-108. Click Here
32. M. Hosseini and H. Abbas (2008), “Neural network approach for estimation of hole-diameter in thin plates perforated by spherical projectiles”, Thin-Walled Structures, Volume 46, Issue 6, June, pp. 592-601. Click Here
31. A. Usmani, M. Anwer, S.S. Shah and H. Abbas (2008), “A study of multilayer soil-fly ash layered system under cyclic loading”, International Journal of Civil Engineering, Vol. 6, No. 2, pp. 73-89. Click Here
30. M. Shariq, H. Abbas, H. Irtaza and M. Qamaruddin (2008), “Influence of openings on seismic performance of masonry building walls”, Building and Environment, Volume 43, Issue 7, July, pp. 1232-1240. Click Here
29. M. Hosseini and H. Abbas (2008), “Neural network approach for failure analysis of rectangular plates under wedge impact”, Latin American Journal of Solids and Structures, Volume 5, Number 3, pp. 171-186. Click Here
28. M.N. Mannan, R. Ansari and H. Abbas (2008), “Failure of aluminium beams under low velocity impact”, International Journal of Impact Engineering, Volume 35, Issue 11, November, pp. 1201-1212. Click Here
27. F. Mahdi, A.A. Khan and H. Abbas (2007), “Physiochemical properties of polymer mortar composites using resins derived from post-consumer PET bottles”, Cement and Concrete Composites, Vol. 29, pp. 241-248. Click Here
26. N.A. Siddiqui, S. Kumar, M.A. Khan and H. Abbas (2006), “A simplified procedure to incorporate soil nonlinearity in missile penetration problems”, Structural Engineering & Mechanics, Vol. 23, No. 3. Click Here
25. M. Hosseini and H. Abbas (2006), “Growth of hole in thin plates under hypervelocity impact of spherical projectiles”, Thin-Walled Structures, Vol.  44, No 9, pp. 1006-1016. Click Here
24. M. Hosseini, H. Abbas and N.K. Gupta (2006), “Straight fold analysis for axisymmetric crushing of thin walled frusta and tubes”, Latin American Journal of Solids and Structures, Vol. 3, No. 4, Dec. 2006, pp. 345-360. Click Here
23. N.K. Gupta, H. Abbas and M. Hosseini (2006), “Axi-symmetric crushing of thin walled frusta and tubes”, Proceedings of the Indian National Science Academy, Vol. 72, No 1, March, pp: 49-54. Click Here
22. A. Masood, H. Abbas, M. Arif, S.A. Khan and M. Haquie (2006), “Waste Utilization in recycled Concrete”, Journal of Structural Engineering, Vol. 33, No. 3, Aug.-Sept., pp. 243-246.
21. N.K. Gupta, H. Abbas and Venkatesh (2005), “Considerations in straight fold analysis of thin tubes under axial compression”, Int J of Impact Engineering, Vol. 31, Issue 8, pp. 1039-1053. Click Here
20. H. Abbas, N.K. Gupta and M. Alam (2004), “Nonlinear response of concrete beams and plates under impact loading”, Int J of Impact Engineering, Vol. 30, Issue 8-9, pp. 1039-1053. Click Here
19. B.L. Tyagi, H. Abbas, M. Arif and N.K. Gupta (2004), “Change in thickness in curved fold model for axial crushing of tubes”, Int J of Solids and Structures, Vol. 41, Issue 24-25, pp. 7129-7153. Click Here
18. M.A. Khan, N.A. Siddiqui, H. Abbas (2004), “Reliability analysis of latticed steel towers against wind induced displacement”, Steel & Composite Structures, Vol. 4, No. 1. Click Here
17. H. Abbas, B.L. Tyagi, M. Arif and N.K. Gupta (2003), “Curved fold model analysis for axisymmetric axial crushing of tubes”, Thin-Walled Structures, Vol. 41, Issue 7, pp. 639-661. Click Here
16. N.A. Siddiqui, M.A. Iqbal, H. Abbas and D.K. Paul (2003), “Reliability analysis of nuclear containment without metallic liners against jet aircraft crash”, Nuclear Engineering & Design, Vol. 224, Issue 1, pp. 11-21. Click Here
15. M.M.A. Khan, H. Abbas and N.K. Gupta (2003), “Analysis of axisymmetric crushing of frusta”, Defence Science Journal, Vol 53, No.1, pp. 41-50. Click Here
14. U. Khan, N.A. Siddiqui, A. Umar and H. Abbas (2003), “Local damage in concrete targets under impact loads”, Defence Science Journal, Vol 53, No. 1, pp. 67-73. Click Here
13. N.A. Siddiqui and H. Abbas (2002), “Mechanics of missile penetration into geo-materials”, Structural Engineering & Mechanics, Vol 13, No.6, pp.639-652. Click Here
12. M.A. Choudhary, N.A. Siddiqui and H. Abbas (2002), “Reliability analysis of buried concrete targets under missile impact”, Int J of Impact Engineering, Vol. 27, No. 8, pp. 791-806. Click Here
11. N.A. Siddiqui, M.A. Choudhury and H. Abbas (2002), “Reliability analysis of projectile penetration into geological targets”, Reliability Engineering & System Safety, Vol. 78/1, pp. 13-19. Click Here
10. M. Amanullah, N.A. Siddiqui, A. Umar and H. Abbas (2002), “Fatigue reliability analysis of welded joints of a TLP tether system”, Steel & Composite Structures, Vol. 2, No. 5, pp. 331-354. Click Here
9. N.K. Gupta and H. Abbas (2001), “Some considerations in axisymmetric folding of metallic round tubes”, Int J of Impact Engineering, Vol. 25, pp. 331-344. Click Here
8. N.K. Gupta and H. Abbas (2000), “Lateral collapse of composite cylindrical tubes between flat platens”, Int J of Impact Engineering, Vol. 24, pp. 329-346. Click Here
7. N.K. Gupta and H. Abbas (2000), “Axisymmetric axial crushing of thin frusta”, Thin-Walled Structures, Vol. 36, pp. 169-179. Click Here
6. N.K. Gupta and H. Abbas (2000), “Mathematical modeling of axial crushing of cylindrical tubes”, Thin-Walled Structures, Vol. 38, pp. 355-375. Click Here

Before 2000 (5 Papers)
5. H. Abbas, D.K. Paul, P.N. Godbole and G.C. Nayak (1996), “Aircraft crash upon outer containment of nuclear power plant”, Nuclear Engineering and Design, Vol. 160(1-2), pp. 13-50. Click Here
4. A. Umar, H. Abbas, A. Qadeer and D.K. Sehgal (1996), “Prediction of error in finite element results”, Computers & Structures, Vol. 60, No. 3, pp. 471-480. Click Here
3. H. Abbas, D.K. Paul, P.N. Godbole and G.C. Nayak (1995), “Soft missile impact on rigid targets”, Int J of Impact Engineering, Vol. 16, No. 5, pp. 727-737. Click Here
2. H. Abbas, D.K. Paul, P.N. Godbole and G.C. Nayak (1995), “Reaction-time response of aircraft crash”, Computers & Structures, Vol. 55, No. 5, pp. 809-817. Click Here
1. N. Islam, H. Abbas and P.C. Jain (1994), “A computer oriented procedure for the yield line analysis of slabs”, Computers & Structures, Vol. 52, No. 3, pp. 419-430. Click Here
Scroll to top

© Copyright - HUSAIN ABBAS